EAA Welcome YouSitemapEnglish中文
Wenzhou EAA Electric Co.,Ltd(subsidiary of Snda Industry Co.,Ltd)

Products

You are here : Home  »  Products

EAA-T1000 I/P,E/P transducer
Type EAA-T1000 I/P,E/P transducer(I/P,E/P converter) converts a current or voltage input signal to a linearly proportional pneumatic output pressure. This versatile instrument is designed for control applications that require a high degree of reliability and repeatability at an economical cost. ​
Please click here to learn more >
EAA-500 I/P,E/P transducer
Type EAA-500 I/P,E/P transducer(I/P,E/P converter) converts a current or voltage input signal to a linearly proportional pneumatic output pressure. This versatile instrument is designed for control applications that require a high degree of reliability and repeatability at an economical cost. ​
Please click here to learn more >
EPC-1000 I/P transducer
Type EPC1000 series I/P converter is a direct moving type electro-pneumatic converting unit that converts different current signals into correspondent pneumatic output ones.The transducer is equipped with a pneumatic power amplifying relay that can provide the pneumatic signal with a higher output power, being sent to various kinds of pneumatic actuator to increase their acting speed.
Please click here to learn more >
EAA-T1500 I/P,E/P transducer
Type EAA-T1500 series I/P,E/P transducer(Electro-pneumatic transducer,I/P,E/P converter) is an electronic pressure regulator that converts a variable signal (current or voltage) to a proportional pneumatic output.
Please click here to learn more >
EAA-550 I/P,E/P transducer
Type EAA-550 series I/P,E/P transducer(Electro-pneumatic transducer,I/P,E/P converter) is an electronic pressure regulator that converts a variable signal (current or voltage) to a proportional pneumatic output.
Please click here to learn more >
YT-1000L Electro-pneumatic positioner
Type YT-1000L Electro-pneumatic valve positioner is used for operation of pneumatic linear valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20 mA or split Ranges.
Please click here to learn more >
YT-1000R Electro-pneumatic positioner
Type YT-1000R Electro-pneumatic valve positioner is used for operation of pneumatic rotary valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20 mA or split Ranges.
Please click here to learn more >
IP 8000 Electro-Pneumatic Positioner
The IP8000 E/P positioner is more compact than the IP6000 with improved visibility of the pressure indicator. Other features include an improved enclosure protection IP65, interchangeable mounting, excellent shock and vibration performance, and a 1/2 split range available by simple span adjustment.
Please click here to learn more >
IP 8100 Electro-Pneumatic Positioner
IP8100, Electro-Pneumatic Positioner, Rotary type. Output current (4-20mADC) realizes remote position detection. External scale plate is installed for easy reading of valve position. The pressure gauge diameter is increased to large size for easy reading. Interchangeable with IP6#00 series.
Please click here to learn more >
NE700 Electro-Pneumatic Positioner
NE positioners These electro-pneumatic positioners operate on a milliampere signal from a controller. They accurately position the control valve assembly in response to a change in input signal. The nominal input resistance is 190 ohms. The moving force coil assembly has low mass and is accurately balanced to assure proper function even in severely vibrating applications. The dynamic behaviour of the positioner can be changed by choosing different size pilot valves.
Please click here to learn more >
YT-1000R with L/S 210 (external) Electro-Pneumatic Valve Positioner
Type YT-1000R+L/S 210 (external) Electro-pneumatic valve positioner is used for operation of pneumatic rotary valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20 mA or split Ranges.
Please click here to learn more >
PT 700 I/P transducer
Type PT 700 series electro-pneumatic transducer provides the proportional conversion from a 4...20 mA input signal to a 0...100% supply pressure output signal. This device provides the interface between the electro-pneumatic positioner and a pneumatic actuator of process industrial applications (chemical, petro-chemical, refineries etc.).
Please click here to learn more >
Navigation

The entire contents of the site.

Global Sales Marketing

 

Contact

 

Copyright © EAA. All rights reserved . Privacy Policy